
Many electromechanical products require CE marking before they can be placed on the EU market, but not simply because they contain a motor, moving parts or electrical controls. The requirement applies when at least one piece of applicable EU harmonisation legislation provides for CE marking. Complete machinery, electrical equipment within specified voltage ranges, radio-enabled devices and equipment for explosive atmospheres are common examples.
A quality team reviewing a motor-driven pump may therefore need to assess several sets of rules, while a bearing or a motor supplied as a component may have a different status. Applying the mark without identifying the product’s scope can be as problematic as omitting it: the mark must not be used on a product for which no applicable legislation provides for it.
The first question is not “Does this product look electromechanical?” but “What exactly is being placed on the market, and for what use?” Record the product’s model, intended function, power supply, operating environment and whether it is complete, partly completed or a component intended for incorporation into other equipment. Keep the supplier’s instructions and technical specifications with that assessment.
A pump sold as a ready-to-use machine, for example, is assessed as the product supplied. A bare pump, electric motor or control component sold for incorporation requires a closer look at its individual characteristics and the legislation covering it. Incorporation into a larger machine does not automatically exempt a component from rules that apply to the component itself. Equally, a CE mark on a component does not establish conformity of the assembled machine.
The following categories are a starting point for an electromechanical products CE assessment. They are not blanket declarations that every model in a category must be marked.
Machinery legislation covers products that meet its legal definition and are not excluded from scope. Examples can include powered lifting equipment, conveyors, machine tools and motor-driven pump assemblies. A machine need not be sold to an end user to be covered: equipment supplied for integration into a production line can still be machinery.
For machinery placed on the market under the current Machinery Directive, the manufacturer must carry out the applicable conformity assessment, prepare technical documentation, provide instructions and issue an EU declaration of conformity before affixing the CE mark. Regulation (EU) 2023/1230 replaces the directive from 20 January 2027, with certain provisions applying on different dates. A team planning a launch around that transition should check the applicable text and timing rather than assuming the previous procedure remains unchanged.
Partly completed machinery is an assembly that is almost machinery but cannot perform a specific application on its own. Under the current directive, it is accompanied by a declaration of incorporation and assembly instructions, not a machinery declaration of conformity for a complete machine. Its manufacturer must also prepare relevant technical documentation. The declaration identifies which essential health and safety requirements have been applied and fulfilled. Another applicable CE-marking law may still require the assembly to bear the mark.
When separate machines are combined into a production line, assess whether the combination forms an assembly of machinery under the applicable rules. The party responsible for the resulting assembly must address risks arising from interfaces, control systems and interaction between units; collecting component declarations alone does not resolve those risks.
The Low Voltage Directive generally covers electrical equipment designed for use with a voltage rating between 50 and 1,000 V AC or between 75 and 1,500 V DC, subject to its exclusions. Many industrial motors, power supplies and control devices fall within those ranges. A nameplate rating outside them is a reason to investigate other applicable rules, not proof that the product is exempt from every CE requirement.
For machinery within the Machinery Directive, electrical hazards must be addressed under machinery legislation, using the safety objectives of the Low Voltage Directive. The directive itself is not normally listed as applicable machinery legislation solely for those hazards. Electrical equipment supplied separately needs its own scope assessment.
Electromagnetic compatibility is a separate question. The EMC Directive can apply to apparatus liable to generate electromagnetic disturbance or whose performance can be affected by it. Motor drives, electronic controllers and powered equipment with switching circuits warrant particular attention. A passive or simple component is not automatically apparatus under that directive; assess its function and how it is supplied. Fixed installations are treated differently from apparatus placed on the market, including with respect to CE marking under the EMC rules.
RoHS rules may also require assessment for electrical and electronic equipment within their scope, including restrictions on certain substances. Do not assume that passing electrical safety and EMC tests settles material compliance. Check the equipment category, any exclusions and applicable exemptions against the actual product and its use.
A machine with Bluetooth, Wi-Fi or another radio function may fall within the Radio Equipment Directive. The applicable requirements depend on the equipment and include safety, electromagnetic compatibility and effective use of radio spectrum; additional requirements may apply to particular categories. Where the directive applies, its relationship with the Low Voltage and EMC directives must be checked rather than treating all three as automatically cumulative.
A module supplier’s declaration and test information can support the assessment, but the finished product may use a different antenna, enclosure, power supply or software configuration. The finished-equipment manufacturer remains responsible for demonstrating conformity of the product placed on the market.
Equipment intended for use in potentially explosive atmospheres may be covered by the ATEX equipment directive. This can include mechanical as well as electrical equipment where it has its own potential ignition source. Determine the intended atmosphere, equipment group and category from the design and instructions; a label such as “industrial duty” does not establish ATEX suitability. Depending on the equipment category and protection method, the conformity assessment may involve a notified body.
Pressure equipment and assemblies may also fall under the Pressure Equipment Directive when their characteristics meet its scope conditions, including pressure limits. A compressor package, for instance, can require separate consideration of machinery, electrical and pressure-related rules. Some pressure equipment is subject to sound engineering practice rather than CE marking under the pressure directive, so the vessel’s category and applicable provisions matter.
Once the product boundary is clear, document each legislation decision, including exclusions and reasons for non-applicability. This prevents a later reviewer from mistaking an omitted directive for an overlooked one. A practical sequence is:
Evidence should be traceable to the model and configuration declared. A test report for a different motor rating, controller firmware or protective enclosure may not support the product under review without a justified assessment of the differences. Where test methods do not cover a hazard, document the additional analysis or verification used.
The manufacturer is responsible for the conformity of the product it places on the market, including conformity assessment, technical documentation and the required declaration. An importer bringing a product from outside the EU has its own obligations, including checking that the manufacturer has completed the relevant procedures and supplied required information. Distributors also have verification duties before making products available. The exact duties depend on the applicable legislation and the operator’s role.
For incoming inspection, compare the product identification and ratings with the declaration, instructions and purchase specification. Check that the declaration names the relevant product and legislation, identifies the manufacturer and is signed by an authorised person. Inspect the CE marking and any additional markings required for the product. A certificate presented by a supplier can be useful supporting evidence, but it is not a substitute for the manufacturer’s declaration or proof that every applicable requirement has been met.
Keep particular control over modifications after assessment. Replacing a drive, adding wireless control or changing the intended atmosphere can alter the applicable requirements or invalidate supporting evidence. Before release, assess the change against the original product boundary and determine whether further risk assessment, testing, documentation or a new conformity procedure is needed.
Contact Us
Got questions about global market dynamics or seeking best practices for your expansion strategy? Drop us a line below, and let the experts at Global Market Feed help you out.
“We respect your privacy. Your information is strictly confidential.”
Related News
0000-00
0000-00
0000-00
0000-00
0000-00
Weekly Insights
Stay ahead with our curated technology reports delivered every Monday.